Matek F405-STD BetaFlight STM32F405 Flight Controller+Matek FCHUB-6S Hub Power Distribution Board for RC Drone

(2 customer reviews)

£35.64

Matek F405-STD BetaFlight STM32F405 Flight Controller+Matek FCHUB-6S Hub Power Distribution Board for RC Drone

Only 2 left in stock

Description

Matek F405-STD  BetaFlight STM32F405 Flight Controller + Matek FCHUB-6S Hub Power Distribution Board
fea08f21 3e14 478f a1a0 4e9ccff45137 1
41a44533 03be 42db ad9f 0c43c776f3d9 1
709d4814 ddf7 430d bf9a 01649e1e3da1 1
219d323a e172 4d66 98b4 91768b0dced6 1
47dd3ac9 849e 4a3c a25b a5a8c8b71b79 1
64eecf4b a996 406c b6f4 3c364a52c465 1
7d0a0618 bb6d 4fd4 9c9f 61b16a9be1e0 1
fd8ccd38 9334 4727 a3b3 98ace7a779b5 1
5fad1198 46ba 4bb2 8ba3 18cbfa55b62f 1  
dad3c86d 5c34 4c9d b7cf 95a7a496a3a7

a91c7efd b6bb 4dd3 aedf e9a28e3c0efa

Specification:
Matek F405-STD (user manual):
Brand: Matek Systems
Item name: Flight Control Board
Size: 36x36mm
Mounting hole: 30.5mm
Weight: 7g

MCU: 168MHz STM32F405RGT6
IMU: 32K ICM20602 gyro/accelerometer (SPI)
Baro: BMP280 (I2C)
OSD: BetaFlight OSD w/ AT7456E chip
Blackbox: MicroSD card slot (SD/SDHC)
VCP, UART1, UART2, UART3, UART4, UART5
Built in inverter for SBUS input (UART2-RX)
PPM/UART Shared: UART2-RX
SoftSerial on TX2, S5 or S6 optional
Camera control on S6 or DAC optional
Smartaudio & Tramp VTX protocol supported
Battery Voltage Sensor: 1:10
Current Sensor: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option)
BEC 5V: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option)
LDO 3.3V: Max.300mA
I2C1 SDA & SCL: Yes
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yes

Matek FCHUB-6S (user manual):
Brand Name: Matek
Model: FCHUB-6S
Item Name: Power Distribution Board Built-in Current Sensor
Size: 36x36mm 
        30.5×30.5mm Hole Mounting , M3
Weight: 8.5g
BEC Output: 5V & 10V

5V BEC Output:
– Designed for RC Receivers, Flight Controllers, OSD and Servos.
– DC/DC synchrous buck regulator
– Voltage: 5.0V (4.9-5.1)DC  
– Current: 1.5A (Max. 2.0A 10S/minute)
– Short-circuit tolerant ( 2 Seconds/minuate)

10V BEC Output:
-Designed for VTX or FPV Camera
– Voltage: 10.0V (9.8-10.2) DC  
– Current: 1.5A ( Max. 2.0A 10S/minute)
– Short-circuit tolerant ( 2 Seconds/minuate)
– 10V can be used to power cameras labeled as 12V.
– The 3S Lipo input voltage should be 11V plus.

Current Sensor Module  
– Max. Range: 184A
– 3.3V ADC
– Scale the output voltage to milliamps ( 1/10th mW/A): 179

Package included:
1x flight control board
2x 0.5mm*16Pin 5cm Flexible Flat Cable
4x M3 Anti-vibration Standoffs
1x FCHUB-6S PDB Board
1x bag of screws

Additional information

Weight0.052 kg

2 reviews for Matek F405-STD BetaFlight STM32F405 Flight Controller+Matek FCHUB-6S Hub Power Distribution Board for RC Drone

    Aiden
    July 18, 2021
    Wow... Wow... WOW.
    Aadarsh
    March 20, 2021
    Wowsers.

Only logged in customers who have purchased this product may leave a review.