iFlight TITAN Chimera7 LR 320mm SucceX-D F7 V2.1 50A BL_32 ESC 6S 7 Inch Long Range FPV Racing Drone BNF w/ 2806.5 1300KV Motor DJI Air Unit HD Digital System

(2 customer reviews)

iFlight TITAN Chimera7 LR 320mm SucceX-D F7 V2.1 50A BL_32 ESC 6S 7 Inch Long Range FPV Racing Drone BNF w/ 2806.5 1300KV Motor DJI Air Unit HD Digital System

This product is currently out of stock and unavailable.

Description

Click here buy 2806.5 1800KV Speed Cruiser Motor Version

Click here buy Analog Version.

Introduction:

iFlight 7 inch Long-Range Drone that can carry bigger batteries to get the flight time to surf the swiss alps if you want!

Super stiff frame for minimum resonance and 2806.5 motors for maximum 7inch prop control.

Fly big batteries top-mounted, or even bigger batteries bottom-mounted, 6cells recommended or 5cells for slow cruising. 

GPS functionality to find your way back and Betaflight GPS Rescue mode ready to setup (default OFF to prevent unexpected behaviour; Setup instructions included).

Vertical and horizontal TBS Crossfire antenna mounts included to cover you and your antenna dead ends.

Features:

– 6mm rigid arm design for more stiffness

– Top- and bottom battery mount option

– XING 2806.5 efficient wide stator motors

– GPS pre-installed for more safety at distance

– TPU Bottom Stand for Gopro Camera  (Camera and Camera Mount are NOT included)

– 360° TPU protection, DJI cam protection and antenna mounts

 DJI FPV Air Unit, buttery-smooth 720p120fps FPV feed (TPU soft mounted) 

– No props in view (DJI Air unit record in 1080p/60fps)

– Battery voltage LED status light (illuminated IF logo on the bottom)

Specification:

Brand Name: iFlight

Model: Chimera7

Item Name: 320mm F7 6S 7 Inch Long Range FPV Racing Drone

Drone Wheelbase: 320mm

Optional Receiver Version: BNF-DJI  ( Built-in DJI Receiver)

                                            TBS Crossfire Nano RX ( Built-in DJI Receiver & External TBS Crossfire Nano Receiver)

Weight: 628.1 ( without Battery)

Flight Time: 17-19 Mins ( Take Example as 6S 4500mAh Lipo)

Chimera7 320mm Frame Kit

Wheelbase: 320mm

Main body dimension: 258*199mm

Bottom to top distance: 20mm

Arm thickness: 6mm

Bottom plate thickness: 3mm

Top plate thickness: 2mm

Upper(middle) plate thickness: 3mm

Camera plate thickness: 3mm (included TPU inserts)

SucceX-D F7 V2.1 TwinG Flight Controller

MCU: 216MHz STM32F722

Gyroscope: 2x ICM20689

Barometer: YES

Blackbox: 32MB

Betaflight OSD:  YES

BEC: 5V 2.5A / 9V 2.5A

Current sensor scale:  100

Inverter for SBUS input (UART2-RX)

Smartaudio & Tramp VTX protocol supported

Beeper pad: Yes

RSSI input pad: No

UARTs: 5

Motor outputs: 8

8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)

6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V)

BLHeli32 Telemetry:RX5

Input voltage: recommended 2-6S, MAX 8S

Firmware Target:   IFLIGHT_F722_TWING

Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm

Dimensions:  36x36mm

Weight: 7.5g

USB type-C

SucceX 50A BLHeli_32 4in1 ESC

MCU: STM32F051

Up tp 48kHz PWM frequency

Capacitance: 470uF/50V

Current Sensor: Yes

Input: 2-6S LIPO

Constant: 50A / Burst: 60A

BlHeli32 telemetry: Yes

BEC: No

Supports up to Dshot1200, Proshot, Oneshot, Multishot 

Target: iFlight-BL32-4IN1

Weight: 14.4g

Size: 43x39mm (including the power pads)

Mounting Hole: 30.5×30.5mm/Φ3mm

XING 2806.5 1300KV Motor
Voltage: 2-6S
KV: 1300KV
Configuration: 12N14P
Bearing: NMB 11*5*5
Stator Diameter: 28
Stator Length: 6.5mm
Shaft Diameter: M5
No.of Cells(Lipo): 2-6S
Weight: 49.5g(with a short cable)
Motor mount hole: 19×19 φ3mm
Gemfan 7040 3-Blade Propeller

Quantity: 2 CW & 2 CCW

Color may vary

DJI Air Unit HD Digital System & Camera
Weight : Air Unit (Camera included): 45.8 g / 3.9 g (MMCX elbow each)
Dimensions
Air Unit: 44 x 37.8 x 14.4 mm
Camera: 27.4 x 21.1 x 20.1 mm
Coaxial Cable: 100 mm
Optional Receiver Version

BNF-DJI Version: Built-in DJI Receiver ( On DJI Air Unit Module);

this version is compatible with DJI Remote Controller.

TBS Crossfire Nano RX Version: Built-in DJI Receiver and has a external TBS Crossfire Nano RX;

this version is compatible with DJI Remote Controller and Official TBS Radio Transmitter

Lipo Battery ( NOT Included)Recommend 5S 3000mAh above (slow cruising) or 6S 2500mAh above

Package Included:

1x Chimera7 Drone

1x TPU bottom stand incl. lock screw ( for Installing TPU Camera Mount)

1x DJI FPV Camera ( Built Well on Drone)

1x DJI FPV Air Unit Module  ( Built Well on Drone)

2x 5.8G Albatross RP-SMA Antenna LHCP 150mm

2x Gemfan 7040 Propeller CW

2x Gemfan 7040 Propeller CCW

4x 20x250mm PU Leather Battery Strap (Color May Vary)

eba969ad 71a7 43ee 82ef 06faa91eba1a

869f69d1 c081 4462 a5c1 f4349a957f42

ec42223f fe1e 47f9 bb60 0a4a59c85b05

b3952b9e 1f49 428e 84e0 fcfd194417f1

0c6bd44f 024a 4889 bc65 286dcefbcc8f

bcb35d26 be9a 40d5 b97d b7b14d56b601

503e5dbe 4e6e 4913 ae7c d88959b3625d

b1e25443 556d 4d28 b4be 6c25deca95c0

Additional information

Weight1.0 kg
Receiver

BNF-DJI, TBS Crossfire Nano RX

2 reviews for iFlight TITAN Chimera7 LR 320mm SucceX-D F7 V2.1 50A BL_32 ESC 6S 7 Inch Long Range FPV Racing Drone BNF w/ 2806.5 1300KV Motor DJI Air Unit HD Digital System

    Charles
    September 13, 2021
    A must - have.
    Ryan
    March 10, 2021
    Good service.

Only logged in customers who have purchased this product may leave a review.