Holybro Kakute F7 AIO V1.5 STM32F745 Flight Controller w/ OSD PDB Current Sensor Barometer for RC Drone

(2 customer reviews)

£49.44

Holybro Kakute F7 AIO V1.5 STM32F745 Flight Controller w/ OSD PDB Current Sensor Barometer for RC Drone

In stock

Description

Holybro Kakute F7 AIO STM32F745 Flight Controller w/ OSD PDB Current Sensor Barometer for RC Drone

Overview:

The Holybro Kakute F7All-In-One flight controller makes it easy to build your multirotor. It integrates flight controller (FC),
power distribution board (PDB), and on-screen display (OSD) in one. The Kakute F7 AIO’s layout makes it easy to wire
up the other components of the multirotor while keeping the build neat and tidy.
IMU updated to MPU6000,Re-designed and more reliable damping structure

Specification(manual):
Brand name: Holybro
Item name: kakute F7 AIO V1.5

MCU: STM32F745 32-bit processor
IMU: ICM20689 (SPI)
Barometer: BMP280
Current Sensor: Approximately 130 amps maximum measurable value
USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
6 hardware UARTS (UART1,2,3,4,6,7)
All UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”.
Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.
TF card for Blackbox logging
Dimensions: 35x48x7mm (includes foam-mounted gyro board in height)
Mounting Holes: Standard 30.5mm square to center of holes
Weight: 11g

Features:

• Supports Betaflight, Butterflight, and Cleanflight.
• Betaflight OSD. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level,
  all using your transmitter sticks and goggles.
• Soft-mounting built in. The IMU (“gyro”) chip on this board is mounted on vibration-isolating foam. This means that there is no need
  to soft-mount the board itself.
• High-performance / low-noise / high sensitivity IMU. ICM20689 with 6-axis gyro and accelerometer. Can run at up to 32 kHz sampling rate.
• Ready for autonomous flight: Integrated BMP280 barometer and SCL/SDA pads for use with external GPS/magnetometer units.
• 2 oz. copper PCB allows up to 120A maximum continuous current.
• Dedicated bootloader button for easy firmware flashing.
• Low-profile design fits into even very compact frames.
• Input voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only).
• Automatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the Kakute F7 AIO monitors voltage directly
  from the battery power lead.
• Filtered voltage output for clean, noise-free video. On-board regulators output 5v at up to 2 amps and 3.3v at up to 200 mA to power
  peripherals such as receiver, video transmitter, FPV camera, or LED strip.
• Supports BLHeli pass-through for easy ESC upgrade and configuration.

Package included:
1x kakute F7 AIO V1.5 flight controller

3d867856 cc45 4d7f a11d f919bfd66a7a 1

145f1c44 1356 4c6c a234 ce55fd29947a 1

e56689bc 177c 428c 83e5 bb8bc7c58521 1

b64a3108 cc5a 4ff2 8acb 45c41300e64c 1

2ec8db59 f3a5 4c88 b083 29d8fd2cb4df 1

21d3beb6 5978 4380 9079 3876beec9cd9 1

Additional information

Weight0.028 kg

2 reviews for Holybro Kakute F7 AIO V1.5 STM32F745 Flight Controller w/ OSD PDB Current Sensor Barometer for RC Drone

    Owen
    April 21, 2021
    So far so good.
    Mason
    March 19, 2021
    100 % must have.

Only logged in customers who have purchased this product may leave a review.