50% off!

HappyModel 2.4G ExpressLRS ELRS Starter Set ES24TX 2.4G Micro TX with 3PCS 2.4G EP1 EP2 RX for RC Airplane FPV Long Range Drones

(2 customer reviews)

£58.00£126.00

2PCS ES24TX2PCS ES24TX 6PCS EP12PCS ES24TX 6PCS EP2ES24TX 3PCS EP2 RX
Clear
SKU: 1005002552507170 Categories: ,

Description

HappyModel 2.4G ExpressLRS ELRS Starter Set ES24TX 2.4G Micro TX with 3PCS 2.4G EP1 EP2 RX for RC Airplane FPV Long Range Drones

ES24TX

This Micro TX is designed by Happymodel and based on the open source- ExpressLRS which is a very popular low latency and high re-flashed rate RF module for RC Airplane and FPV Racing. Its main hardware architecture is ESP32, ESP8285 and SX1280 RF chip. The ES24TX module is a complete solution which is already pre-load the Expresslrs firmware and it’s plug and play.
Specifications:
Regulatory Domain: ISM2400
MCU:ESP32(main),ESP8285(aux,as espbackpack)
RF chip:SX1280IMLTRT
JR standard 5pin socket
Frequency Range: 2400 MHz to 2500 MHz
Maximum receive refresh rate: 500Hz
Minimum receiver refresh rate: 25Hz
RF Output Power: 10dBm~24dBm
Power supply voltage: 5v~10v
Weight: 9.5gram(without antenna)
Dimension: 55.5mm*39.5mm*8mm
Antenna gain:1.87dBi
Package include:
EX24TX *1
24TX80 antenna *1
3D Printed mounting box *1
Antenna adapter cable *1
Since the official ExpressLRS perfect program has not been released yet, our pre-installed program is a beta version, because there are too many types of beta version programs , so you can download the out of factory firmware from our website. There are two kinds out of factory firmware of ES24TX, one is to match Happymodel PP RX receiver (program version identification code 6cb8152d) and the other is to match Happymodel EP1 and EP2 RX receivers (program version identification code aec8ad82), The default factory firmware is aec8ad82 which matching EP1 and EP2 RX
You can download the firmware from our website, and then update the firmware via connect the Wifi hot spot of the ES24TX, visit “10.0.0.1” by browser (password:expresslrs)

Notes:
Since the Official Perfect version of ELRS firmware has not been released yet, currently our PP_RX, EP1/EP2 RX and ES24TX pre-loaded firmware are all beta versions, you can upgrade the official firmware when Official perfect target available.
More details: //github.com/ExpressLRS/ExpressLRS
The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released.
The PP RX is designed by @Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. It has a built-in ceramic antenna, which is super light and small in size.
On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that’s too simple .
Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size.
PP(w/ antenna) EP1(w/o antenna) EP2(w/ antenna)
MCU STM32L432KBU6 ESP8285 ESP8285
RF Chip SX1280IMLTRT SX1280IMLTRT SX1280IMLTRT
Antenna SMD Ceramic Omnidirectional SMD Ceramic
Dimension 10mm*10mm*6mm 10mm*10mm*3mm 10mm*10mm*6mm
Weight 0.47g 0.42g 0.44g
Firmware target 6cb8152d aec8ad82 aec8ad82
Firmware upload Betaflight pass-through Wifi Wifi

Specifications:
PP_RX
Type: ISM
STM32L432KBU6 MCU
SX1280IMLTRT RF Module
SMD Ceramic antenna
Frequency Range: 2400 MHz to 2500 MHz
Maximum receive refresh rate: 500Hz
Minimum receiver refresh rate: 25Hz
Working voltage: 5v
Weight: 0.47gram
Dimension: 10mm*10mm*6mm
Peak gain: 3.7dB

EP1_RX
Type: ISM
ESP8285 MCU
SX1280IMLTRT RF Module
Omnidirectional antenna
Frequency Range: 2400 MHz to 2500 MHz
Maximum receive refresh rate: 500Hz
Minimum receiver refresh rate: 25Hz
Working voltage: 5v
Weight: 0.42gram(without antenna)
Dimension: 10mm*10mm*6mm
Peak gain: 2.23dB

EP2_RX
Specifications:
Type: ISM
ESP8285 MCU
SX1280IMLTRT RF Module
SMD Ceramic antenna
Frequency Range: 2400 MHz to 2500 MHz
Maximum receive refresh rate: 500Hz
Minimum receiver refresh rate: 25Hz
Working voltage: 5v
Weight: 0.44gram
Dimension: 10mm*10mm*6mm
Peak gain: 3.7dB
Bind procedure:
1. Supply power to the PP/EP1/EP2 rx, wait until the LED on the RX is off, immediately turn off the power, and then repeat again the above steps. When the RX is powered on for the third time, the LED light will start to double-flash, which means that the RX enters the binding mode
2. Insert the ES24TX module or other DIY 2.4G ELRS TX to Radio transmitter, and choose External RF mode to CRSF protocol, then you can find ELRS menu from the Radio systems(Need to copy the ELRS.LUA file to the SD-Card tools first), Enter into ELRS and press [Bind], the LED on the RX module will getting to be solid if bind successfully.
3. Receiver LED status meanings:
PP RX: LED solid means bind successful or Connection established; LED double-flash means in bind mode; LED flash slowly means no signal connection from the TX module
EP1/EP2 RX: LED solid means bind successful or Connection established; LED double-flash means in bind mode; LED flash slowly means no signal connection from the TX module; LED flash fast means in WIFI hotspot mode, you can connect the WIFI of the RX and upgrade firmware of the RX via visit 10.0.0.1(password:expresslrs)

Shipping list:
1 x ES24TX
3 x PP RX / EP1 RX / EP2 RX (choose by yourself)

HappyModel 2.4G ExpressLRS ELRS Starter Set ES24TX 2.4G Micro TX with 3PCS 2.4G EP1 EP2 RX for RC Airplane FPV Long Range Drones
HappyModel 2.4G ExpressLRS ELRS Starter Set ES24TX 2.4G Micro TX with 3PCS 2.4G EP1 EP2 RX for RC Airplane FPV Long Range Drones
HappyModel 2.4G ExpressLRS ELRS Starter Set ES24TX 2.4G Micro TX with 3PCS 2.4G EP1 EP2 RX for RC Airplane FPV Long Range DronesHappyModel 2.4G ExpressLRS ELRS Starter Set ES24TX 2.4G Micro TX with 3PCS 2.4G EP1 EP2 RX for RC Airplane FPV Long Range Drones
HappyModel 2.4G ExpressLRS ELRS Starter Set ES24TX 2.4G Micro TX with 3PCS 2.4G EP1 EP2 RX for RC Airplane FPV Long Range Drones
HappyModel 2.4G ExpressLRS ELRS Starter Set ES24TX 2.4G Micro TX with 3PCS 2.4G EP1 EP2 RX for RC Airplane FPV Long Range Drones

Additional information

Brand Name

AIRFORTH

Origin

CN(Origin)

Material

other

Recommend Age

12+y

Tool Supplies

other

Upgrade Parts/Accessories

other

RC Parts & Accs

other

Model Number

ELRS Starter Set

Remote Control Peripherals/Devices

other

For Vehicle Type

Helicopters

Four-wheel Drive Attributes

other

2 reviews for HappyModel 2.4G ExpressLRS ELRS Starter Set ES24TX 2.4G Micro TX with 3PCS 2.4G EP1 EP2 RX for RC Airplane FPV Long Range Drones

    William
    March 29, 2021
    100 % must have.
    John
    March 12, 2021
    Wowsers.

Only logged in customers who have purchased this product may leave a review.